Current Loop Sensor 2 (250A)
AVTECH's Current Loop Sensor monitors the electrical current flowing through a single-phase powered cable. It outputs a signal of 0 to 5 VDC (volts of direct current), which your built-in or external Room Alert Analog Sensor Port then converts into an amp (A) reading. A current flow sensor paired with your Room Alert monitor can easily be used as an energy consumption monitor of an electrical appliance or device at your facility. The Current Loop can be easily moved to various appliances as needed and will help you monitor power consumption to determine if a power drop might be causing a problem or if an appliance is drawing too much power.
Specifications
| Environment Condition Monitored | Electrical current (amps) |
| Type Of Sensor | Switch |
| Power Supply | Induced from monitored conductor |
| Included Sensor Cable Type | Low-voltage 2-wire speaker cable |
| Included Sensor Cable Length | 25' (7.62 m) |
| Maximum Sensor Cable Length | 100' (30.48 m) |
| Output Voltage | 0 to 5 VDC |
| Input Amperage Range | 0 to 250 A |
| Accuracy | +/- 1.0% (5 to 100% FSO) |
| Response Time | < 100 mS |
| Operating Frequency Range | 50 to 600 Hz |
| Isolation Voltage | 2,200 VAC |
| Maximum Sensing Current Voltage | 600 VAC |
| Aperture (Hole) Size | 0.75" or 1.91 cm (Accepts cables up to 350 MCM) |
| DIN Rail Size | 35 mm |
| Operating Temperature Range | -15 to 40°C (5 to 104°F) |
| Operating Humidity Range | 0 to 95% RH, non-condensing |
| Enclosure Rating | UL94-5VB |
In the box
- (1) Current Loop Sensor
- (2) #8 x ¾" TEK mounting screws
- (1) 25' (7.62 m) speaker wire cable
- Installation Note & Instruction Sheet
- 1 Year Warranty & Replacement Guarantee
Downloads
Supplied, warranted and supported in South Africa by EDP Communications, an authorised Room Alert reseller. Prices are in ZAR and include import duties and local warranty.